Home > Products > Activated Carbon > Activated Carbon For Desulfurization

Activated Carbon For Desulfurization

Product categories of Activated Carbon For Desulfurization, we are specialized manufacturers from China, Activated Carbon For Desulfurization, Desulfurization Activated Carbon suppliers/factory, wholesale high-quality products of Cylindrical Activated Carbon for Desulfurization R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
China Activated Carbon For Desulfurization Suppliers
Charcoal desulphurization

Developed in the 70 s by using Activated Carbon removing the sulphur in flue gas desulfurization technology, compared with the traditional desulfurization technology,

Carbon method flue gas desulfurization technology has many advantages:

(1) the desulfurizer consumption less, can use again, which saves raw materials, reduce the operation cost;

(2) recovery of desulfurization products;

(3) the process is simple and easy to operate;

(4) there is no secondary pollution problem.

The carbon desulphurization material of this section is folded.
Carbon materials are mainly activated carbon desulphurization, containing carbon materials to preparation, shells, sawdust and other raw materials due to the soft, is advantageous to the activator to enter, so the reaction performance is good, of large specific surface area activated carbon, developed micropore volume, adsorption performance is good. But the cost of such materials is high and resources are limited, so people are turning their attention to rich, cheap coal. But due to the formation of coal is affected by many factors, composition, properties are different in different parts of the coal, therefore made of activated carbon pore structure and adsorption performance each are not identical, the metamorphic degree of coal is lower, the higher the content of volatile, made of activated carbon desulfurization effect is better. For coal, anthracite coal metamorphic degree and graphitization degree is the highest, bituminous coal, coal metamorphic degree and the degree of graphitization, so most researchers in recent years in lignite and bituminous coal as raw materials via pyrolysis activation to the preparation of activated carbon. The new water industry researchers have found that two different kinds of coal with different performance can guarantee the performance of each activated carbon and make up for their adsorption performance. In addition, the technology of making activated carbon from waste materials has also been widely concerned, such as various food waste residue, agricultural and sideline product waste, activated sludge, waste tires and so on.
Communicate with Supplier?Supplier
He miao Mr. He miao
What can I do for you?
Contact Supplier