Sewage treatment
Activated Carbon can be used in urban drinking water to be used for advanced purification of urban drinking water, removing residual r chlorine and deodorizing. It is also the advanced purification material in the process of high purity water and artificial mineral spring. It can improve boiler efficiency and prolong the life of boiler by removing COD and other harmful impurities in advance. It can effectively remove COD, pigment, odor and other toxins in the water, and the large particle activated
Carbon can fill the filter and purify the air.
Activated carbon for sewage treatment for wastewater treatment, which can effectively deodorant, decoloring, effectively remove harmful substances in water quality,
Granular Activated Carbon high quality anthracite as raw materials, refined through advanced process and appearance in black amorphous particles; It has developed pore structure, good adsorption performance, high mechanical strength, easy to reproduce and low cost. Used for purification of toxic gases, treatment of waste gas, purification treatment of industrial and domestic water, solvent recovery, etc.
It is mainly used for industrial water, life water and various gas pretreatment and deep purification, and can also be used in the decolorization of solution!
There are three requirements for
Activated Carbon For Water Treatment: large adsorption capacity, fast adsorption speed and good mechanical strength. The adsorption capacity of activated carbon is attached to other external conditions, which is mainly related to the surface area of activated carbon, larger than surface area, and the number of micropores, which can be adsorbed on the fine pore wall. The adsorption speed is mainly related to the distribution of particle size and pore size, and the activated carbon used in water treatment requires that the transition hole (radius 20~1000A) is more developed, which is conducive to the diffusion of adsorption to micropores. The smaller the particle size of activated carbon, the faster the adsorption speed, but the loss of water head should be increased. Generally, the mechanical wear strength of activated carbon is more suitable in the range of 8~30, which directly affects the service life of activated carbon.
